Protect Your Vehicle with Bilt Hamber Atom-Mac: The Ultimate Corrosion and Rust Inhibitor
Tired of battling corrosion or rust on your vehicle's braking surfaces, and other vulnerable areas? Bilt Hamber Atom-Mac is our newest offering in the OG store to protect your vehicle from the destructive forces of rust and corrosion.
What is it?
Atom-Mac is more than just your average corrosion inhibitor. It's a powerful migratory and contact corrosion inhibitor designed to safeguard your vehicle against rust in open spaces and hollow voids. When diluted in water, unleashes a potent arsenal of corrosion-fighting agents that form an invisible atomic shield, providing unparalleled protection for ferrous metals.
What can it protect?
It ensures corrosion protection wherever rust may rear its ugly head, from vehicle undersides to water-collecting voids, braking surfaces, suspension components, bicycles, garden equipment, and machinery.
How to use it?
Using Atom-Mac is a breeze. Simply dilute it from 2% to 5% in water and spray it onto the surfaces you want to protect. Whether you're safeguarding your car's rotors, suspension, or prized mountain bike. If you need help with dilutions, use a Dilution Ratio Calculator.
Grab a Pressol if you don't already have one to house your diluted final product!
For brake discs and surfaces of your vehicle, spray on the rotor surface after washing your vehicle and let it dry. For motorcycles and bikes, use a slightly lower concentration of around 1-2% in water, while for cars with disc brakes, a 5% dilution is recommended. This is safe to use on painted surfaces, so if you have painted brake calipers, you won't face any issues.
Application Tips
- Apply a fine mist, not a heavy soak. You want to atomize it onto the surface. If you blast it onto a rotor that still has standing water on it, you dilute the mix and it runs right off. Weak film, weak protection.
- Do not rinse it off. Atom-Mac goes on last. If you spray it and then rinse the wheel again, you just washed away the part doing the work. Spray it, then let it dry.
- Start with a clean surface. If you used an iron remover or an acidic wheel cleaner, rinse it fully before you apply. Leftover cleaner sitting on bare cast iron will flash rust fast, and no inhibitor fixes that.
- Know what it does. Atom-Mac slows corrosion. It does not turn cast iron into stainless steel. A bare rotor left outside wet or overnight in humidity can still show light flash rust. That is normal for the metal.
- Driving scrubs the swept face. The moment you drive, your pads wipe the film off the braking surface. Rust there after a drive is normal rotor behavior, not a product failure. The film keeps protecting the vent holes, edges, and hat.
For pressure washer application, aim for a 2% strength from the nozzle. This allows you to cover the entire underside of your vehicle, neutralizing road salt and emitting powerful corrosion inhibitors in the process. Its inhibitors continue to protect your vehicle while it's parked.
For more information and tips on optimizing your car care routine, stay tuned to our socials and YouTube Channel.